Help
How to export from Revit
Export the model to IFC with the property sets the rules read. Do one test export and run it before you rely on the settings.
- Who can do this
- Anyone who models in Revit.
The steps follow the “Revit IFC export kit”, which marks what was seen in a real export (checked) and what we understand but have not confirmed (unchecked). Setting names can differ between versions of the Revit IFC exporter.
Download the Revit IFC export kit (text file)
- In Revit, select File, then Export, then IFC, then Modify setup.
- Set the IFC version to IFC4 Reference View or IFC 2x3 Coordination View 2.0. Both are read. (checked)
- Turn on Export IFC common property sets. This writes the standard sets, such as the common set of a wall or a door. (checked)
- Turn on Export rooms so spaces are written. The rules ask every space for a number, a name and a level. (checked)
- For classification codes, confirm in the result that classification references exist. One test export had them and another did not. We do not know yet which setting drives it. (unchecked)
- For manufacturer, model number and warranty, map your own Revit parameters to the standard property names with the mapping file in the kit. Turn on Export user defined property sets and point it to the file. (unchecked)
- Export, then open Check a model and drop the file there.
- Read the result. If a value you set in Revit still reads as missing, check the mapping, export again and check again.
What you should see
A result that reads the properties you exported. A value that is missing in the result and present in Revit points to the export settings or the mapping.
Notes
What each rule reads and where Revit usually puts it is listed in section 2 of the kit. The kit says which values a test export lacked: model number and warranty were absent from every test export and need the mapping. Fire ratings, occupancy, exit doors, door clear width and sprinklers belong to the code data check. A check of model data, not a code approval. Other tools: export an IFC 2x3, IFC4 or IFC4.3 file with the common property sets turned on.